Media & Resins For Water Filtration
CARBON
SILVER IMPREGNATED GRANULAR ACTIVATED CARBON(GAC)
Silver Impregnated Granular Activated Carbon(GAC)
Formula: AgC
Ingredients: Carbon(99.8%), Silver(0.2%)
Data Sheet Silver Impregnated GAC
CATALYTIC GRANULAR ACTIVATED CARBON(1240CAT) 12"X40" BAG
CATALYTIC GAC 12"X40" BAG
Particle Size 12 x 40 US MESH
Apparent Density (ASTM 2864) 0.45-0.49 g/cc
Specific Surface Area (N2 Bet Method) 1100-1150 m2/gm
Ash Content (ASTM 2866) 2% Max
Moisture Content 3% Max
Hardness (ASTM 3802) 98.0% Minimum
Iodine Number 1100 mg/gm
Bulk Density 27.5 Lb/ft3
Catalytic Activity(Temperature increase) 200 C
MCA Removal Capacity(mg/g) 135-150
Standard Packaging 27.5lb. Paper bag, 200 lb. fiber drums and 1000 lb. super sacks are
available.
DATA SHEET CATALYTIC GAC
TURBIDEX
Turbidex is composed of aluminosilicate mineral with high surface area that provides a exceptional filtration of suspended solids. The macroporous nature of this filter medium allows the filter reach a filtration rating of 5 micron particles. The irregular and high porosity surface of Turbidex makes it the perfect filter media for removing suspended solids.
– Produces less water turbidity.
– Reduces the total operating cost.
– Reduces backwash up to 50%.
– Less shipping cost compared to other filter media.
– A single medium replaces several layers of other filter media.
– Turbidex is certified NSF Standard 61
Turbidex Data Sheet
TURBIDEX
Turbidex is composed of aluminosilicate mineral with high surface area that provides a exceptional filtration of suspended solids. The macroporous nature of this filter medium allows the filter reach a filtration rating of 5 micron particles. The irregular and high porosity surface of Turbidex makes it the perfect filter media for removing suspended solids.
– Produces less water turbidity.
– Reduces the total operating cost.
– Reduces backwash up to 50%.
– Less shipping cost compared to other filter media.
– A single medium replaces several layers of other filter media.
– Turbidex is certified NSF Standard 61
FILTER-AG PLUS
| Bulk Density | 50 lbs/cu.ft |
| Effective Size | 0.55mm |
| Uniformity Coefficient | 1.8 |
| Mesh Size | 14 x 30 |
| Specific Gravity | 2.2 g/cc |
| Hardness | 4-5 (Mohs Scale) |
| Color | White to off white |
| Conditions for operation | |
| Water pH range | Wide range |
| Maximum Water Temperature | 140˚F/60˚C (media can be steam cleaned) |
| Bed depth | 24"-48" (36" for optimal filtration) |
| Freeboard | 50% of bed depth |
| Service flow rate | 6-15 gpm/sq.ft. with intermittant peak flow 20 gpm/ sq.ft. |
| Backwash flow rate | 14-18 gpm/ sq.ft. |
| Backwash bed expansion | 30-40% of bed depth |
| Other | Influent water quality and effluent requirements may affect operating parameters A gravel support bed is required Allow bed to saturate before initial backwash |
| Code | Model | Cu. Ft./Bag | Weight/Cu. Ft. Lbs (Approximate) |
| A8023 | Filter-Ag Plus® | 1 | 50 |
Data Sheet
ANTHRACITE
| Physical properties | #1 Anthracite | #1½ Anthracite | #2 Anthracite |
| Bulk Density | 50 lbs./cu. ft. | ||
| Effective Size | 0.6-0.8 mm | 0.85-0.95 mm | 1.7-2.0 mm |
| Uniformity Coefficient | <1.7 | <1.7 | <1.6 |
| Mesh Size | 14x30 | 10x20 | 4x12 |
| Acid Solubility | <1% | ||
| Caustic Solubility | <1% | ||
| Specific Gravity | 1.6 gm/cc | ||
| Hardness | 3.0-3.8 (Mohs scale) | ||
| Color | Black |
| Conditions for operation | #1 Anthracite | #1½ Anthracite | #2 Anthracite |
| Water pH range | 24-36 in. 10-18 in multibed filters |
||
| Freeboard | 50% of bed depth (min.) | ||
| Service flow rate | 5 gpm/sq. ft. or higher depending upon local conditions | ||
| Backwash flow rate | 12-18 gpm/sq. ft. | 18-25 gpm/sq. ft. | use air scour |
| Backwash bed expansion | 20-40% of bed depth |
|
| Code | Model | Cu. Ft./Bag | Weight/Cu. Ft. Lbs (Approximate) |
Bags/Pallet | Weight/Pallet Lbs |
Pallet Dimensions |
| A8029 | Anthracite #1 (0.6-0.8 mm) | 1 | 50 | 40/151 | 2550 | 40" x 48" x 56" |
| A8030 | Anthracite #1½ (0.85-0.95 mm) | 1 | 50 | 80/303 | 2550 | 40" x 48" x 56" |
| A8031 | Anthracite #2 (1.7-2.0 mm) | 1 | 50 | 120/454 | 2550 | 40" x 48" x 56" |
Data Sheet
TURBIDEX™
Item Part: TURBIDEX
Sediment removal media down to 3-5 micron
Superior turbidity reduction down to 1 NTU
Flow up to 15 gpm/ft 2
NSF Certified
Packed on 50 lb. bag
DATA SHEET
MICRO-Z
Item Part: MICROZ
Sediment removal media: 5-micron nominal rating
NSF Certified
Low pressure loss
Packed on 1 cuft. bag
DATA SHEET
GRANULAR ACTIVATED CARBON
Item Part: GAC
Coconut shell
NSF Certified
12×40 particle size
Packed on 27.5 lbs. bag, 1 cuft.
DATA SHEET
CLACK
BIRM®
NSF/ANSI/CAN 61
Clack Birm® is a granular filter media commonly used for the reduction of iron and/or manganese from water supplies.
- Under the proper conditions, no chemicals to purchase for maintenance. Regenerant not required.
- Iron removal efficiency is extremely high.
- Negligible labor cost: only periodic backwashing required.
- Durable material with a long life and wide temperature range.
- Weighs only 36-38 lbs./cu. ft.
| Physical properties | |
| Bulk Density | 36-38 lbs./cu. ft. |
| Effective Size | 0.48 mm |
| Uniformity Coefficient | 2.7 |
| Mesh Size | 12 x 50 |
| Specific Gravity | 2.0 gm/cc |
| Color | Black |
| Conditions for operation | |
| Bed depth | 24-36 in. 10-18 in multibed filters |
| Freeboard | 50% of bed depth (min.) |
| Service flow rate | 5 gpm/sq. ft. or higher depending upon local conditions |
| Backwash flow rate | 12-18 gpm/sq. ft. |
| Backwash bed expansion |
20-40% of bed depth |
CONTACT US NOW FOR YOUR PALLET OF BIRM
BIRM DATA SHEET
CALCITE
TURBIDEX
Turbidex is composed of aluminosilicate mineral with high surface area that provides a exceptional filtration of suspended solids. The macroporous nature of this filter medium allows the filter reach a filtration rating of 5 micron particles. The irregular and high porosity surface of Turbidex makes it the perfect filter media for removing suspended solids.
– Produces less water turbidity.
– Reduces the total operating cost.
– Reduces backwash up to 50%.
– Less shipping cost compared to other filter media.
– A single medium replaces several layers of other filter media.
– Turbidex is certified NSF Standard 61
Turbidex Data Sheet
TURBIDEX
Turbidex is composed of aluminosilicate mineral with high surface area that provides a exceptional filtration of suspended solids. The macroporous nature of this filter medium allows the filter reach a filtration rating of 5 micron particles. The irregular and high porosity surface of Turbidex makes it the perfect filter media for removing suspended solids.
– Produces less water turbidity.
– Reduces the total operating cost.
– Reduces backwash up to 50%.
– Less shipping cost compared to other filter media.
– A single medium replaces several layers of other filter media.
– Turbidex is certified NSF Standard 61
FILTER-AG PLUS
| Bulk Density | 50 lbs/cu.ft |
| Effective Size | 0.55mm |
| Uniformity Coefficient | 1.8 |
| Mesh Size | 14 x 30 |
| Specific Gravity | 2.2 g/cc |
| Hardness | 4-5 (Mohs Scale) |
| Color | White to off white |
| Conditions for operation | |
| Water pH range | Wide range |
| Maximum Water Temperature | 140˚F/60˚C (media can be steam cleaned) |
| Bed depth | 24"-48" (36" for optimal filtration) |
| Freeboard | 50% of bed depth |
| Service flow rate | 6-15 gpm/sq.ft. with intermittant peak flow 20 gpm/ sq.ft. |
| Backwash flow rate | 14-18 gpm/ sq.ft. |
| Backwash bed expansion | 30-40% of bed depth |
| Other | Influent water quality and effluent requirements may affect operating parameters A gravel support bed is required Allow bed to saturate before initial backwash |
| Code | Model | Cu. Ft./Bag | Weight/Cu. Ft. Lbs (Approximate) |
| A8023 | Filter-Ag Plus® | 1 | 50 |
Data Sheet
ANTHRACITE
| Physical properties | #1 Anthracite | #1½ Anthracite | #2 Anthracite |
| Bulk Density | 50 lbs./cu. ft. | ||
| Effective Size | 0.6-0.8 mm | 0.85-0.95 mm | 1.7-2.0 mm |
| Uniformity Coefficient | <1.7 | <1.7 | <1.6 |
| Mesh Size | 14x30 | 10x20 | 4x12 |
| Acid Solubility | <1% | ||
| Caustic Solubility | <1% | ||
| Specific Gravity | 1.6 gm/cc | ||
| Hardness | 3.0-3.8 (Mohs scale) | ||
| Color | Black |
| Conditions for operation | #1 Anthracite | #1½ Anthracite | #2 Anthracite |
| Water pH range | 24-36 in. 10-18 in multibed filters |
||
| Freeboard | 50% of bed depth (min.) | ||
| Service flow rate | 5 gpm/sq. ft. or higher depending upon local conditions | ||
| Backwash flow rate | 12-18 gpm/sq. ft. | 18-25 gpm/sq. ft. | use air scour |
| Backwash bed expansion | 20-40% of bed depth |
|
| Code | Model | Cu. Ft./Bag | Weight/Cu. Ft. Lbs (Approximate) |
Bags/Pallet | Weight/Pallet Lbs |
Pallet Dimensions |
| A8029 | Anthracite #1 (0.6-0.8 mm) | 1 | 50 | 40/151 | 2550 | 40" x 48" x 56" |
| A8030 | Anthracite #1½ (0.85-0.95 mm) | 1 | 50 | 80/303 | 2550 | 40" x 48" x 56" |
| A8031 | Anthracite #2 (1.7-2.0 mm) | 1 | 50 | 120/454 | 2550 | 40" x 48" x 56" |
Data Sheet
CALCITE
Item Part: CALCITE
Calcite media for pH adjustment and remineralization
NSF Certified
Packed on 50 lbs. bag
DATA SHEET
TURBIDEX™
Item Part: TURBIDEX
Sediment removal media down to 3-5 micron
Superior turbidity reduction down to 1 NTU
Flow up to 15 gpm/ft 2
NSF Certified
Packed on 50 lb. bag
DATA SHEET
MICRO-Z
Item Part: MICROZ
Sediment removal media: 5-micron nominal rating
NSF Certified
Low pressure loss
Packed on 1 cuft. bag
DATA SHEET
METSORB
TURBIDEX
Turbidex is composed of aluminosilicate mineral with high surface area that provides a exceptional filtration of suspended solids. The macroporous nature of this filter medium allows the filter reach a filtration rating of 5 micron particles. The irregular and high porosity surface of Turbidex makes it the perfect filter media for removing suspended solids.
– Produces less water turbidity.
– Reduces the total operating cost.
– Reduces backwash up to 50%.
– Less shipping cost compared to other filter media.
– A single medium replaces several layers of other filter media.
– Turbidex is certified NSF Standard 61
Turbidex Data Sheet
TURBIDEX
Turbidex is composed of aluminosilicate mineral with high surface area that provides a exceptional filtration of suspended solids. The macroporous nature of this filter medium allows the filter reach a filtration rating of 5 micron particles. The irregular and high porosity surface of Turbidex makes it the perfect filter media for removing suspended solids.
– Produces less water turbidity.
– Reduces the total operating cost.
– Reduces backwash up to 50%.
– Less shipping cost compared to other filter media.
– A single medium replaces several layers of other filter media.
– Turbidex is certified NSF Standard 61
FILTER-AG PLUS
| Bulk Density | 50 lbs/cu.ft |
| Effective Size | 0.55mm |
| Uniformity Coefficient | 1.8 |
| Mesh Size | 14 x 30 |
| Specific Gravity | 2.2 g/cc |
| Hardness | 4-5 (Mohs Scale) |
| Color | White to off white |
| Conditions for operation | |
| Water pH range | Wide range |
| Maximum Water Temperature | 140˚F/60˚C (media can be steam cleaned) |
| Bed depth | 24"-48" (36" for optimal filtration) |
| Freeboard | 50% of bed depth |
| Service flow rate | 6-15 gpm/sq.ft. with intermittant peak flow 20 gpm/ sq.ft. |
| Backwash flow rate | 14-18 gpm/ sq.ft. |
| Backwash bed expansion | 30-40% of bed depth |
| Other | Influent water quality and effluent requirements may affect operating parameters A gravel support bed is required Allow bed to saturate before initial backwash |
| Code | Model | Cu. Ft./Bag | Weight/Cu. Ft. Lbs (Approximate) |
| A8023 | Filter-Ag Plus® | 1 | 50 |
Data Sheet
ANTHRACITE
| Physical properties | #1 Anthracite | #1½ Anthracite | #2 Anthracite |
| Bulk Density | 50 lbs./cu. ft. | ||
| Effective Size | 0.6-0.8 mm | 0.85-0.95 mm | 1.7-2.0 mm |
| Uniformity Coefficient | <1.7 | <1.7 | <1.6 |
| Mesh Size | 14x30 | 10x20 | 4x12 |
| Acid Solubility | <1% | ||
| Caustic Solubility | <1% | ||
| Specific Gravity | 1.6 gm/cc | ||
| Hardness | 3.0-3.8 (Mohs scale) | ||
| Color | Black |
| Conditions for operation | #1 Anthracite | #1½ Anthracite | #2 Anthracite |
| Water pH range | 24-36 in. 10-18 in multibed filters |
||
| Freeboard | 50% of bed depth (min.) | ||
| Service flow rate | 5 gpm/sq. ft. or higher depending upon local conditions | ||
| Backwash flow rate | 12-18 gpm/sq. ft. | 18-25 gpm/sq. ft. | use air scour |
| Backwash bed expansion | 20-40% of bed depth |
|
| Code | Model | Cu. Ft./Bag | Weight/Cu. Ft. Lbs (Approximate) |
Bags/Pallet | Weight/Pallet Lbs |
Pallet Dimensions |
| A8029 | Anthracite #1 (0.6-0.8 mm) | 1 | 50 | 40/151 | 2550 | 40" x 48" x 56" |
| A8030 | Anthracite #1½ (0.85-0.95 mm) | 1 | 50 | 80/303 | 2550 | 40" x 48" x 56" |
| A8031 | Anthracite #2 (1.7-2.0 mm) | 1 | 50 | 120/454 | 2550 | 40" x 48" x 56" |
Data Sheet
METSORB®
Item Part: METSORB
Specially formulated for removal of arsenic, lead, and other heavy metals
Packed on 1 cuft. bag
DATA SHEET
TURBIDEX™
Item Part: TURBIDEX
Sediment removal media down to 3-5 micron
Superior turbidity reduction down to 1 NTU
Flow up to 15 gpm/ft 2
NSF Certified
Packed on 50 lb. bag
DATA SHEET
MICRO-Z
Item Part: MICROZ
Sediment removal media: 5-micron nominal rating
NSF Certified
Low pressure loss
Packed on 1 cuft. bag
DATA SHEET
GRAVEL
TURBIDEX
Turbidex is composed of aluminosilicate mineral with high surface area that provides a exceptional filtration of suspended solids. The macroporous nature of this filter medium allows the filter reach a filtration rating of 5 micron particles. The irregular and high porosity surface of Turbidex makes it the perfect filter media for removing suspended solids.
– Produces less water turbidity.
– Reduces the total operating cost.
– Reduces backwash up to 50%.
– Less shipping cost compared to other filter media.
– A single medium replaces several layers of other filter media.
– Turbidex is certified NSF Standard 61
Turbidex Data Sheet
TURBIDEX
Turbidex is composed of aluminosilicate mineral with high surface area that provides a exceptional filtration of suspended solids. The macroporous nature of this filter medium allows the filter reach a filtration rating of 5 micron particles. The irregular and high porosity surface of Turbidex makes it the perfect filter media for removing suspended solids.
– Produces less water turbidity.
– Reduces the total operating cost.
– Reduces backwash up to 50%.
– Less shipping cost compared to other filter media.
– A single medium replaces several layers of other filter media.
– Turbidex is certified NSF Standard 61
FILTER-AG PLUS
| Bulk Density | 50 lbs/cu.ft |
| Effective Size | 0.55mm |
| Uniformity Coefficient | 1.8 |
| Mesh Size | 14 x 30 |
| Specific Gravity | 2.2 g/cc |
| Hardness | 4-5 (Mohs Scale) |
| Color | White to off white |
| Conditions for operation | |
| Water pH range | Wide range |
| Maximum Water Temperature | 140˚F/60˚C (media can be steam cleaned) |
| Bed depth | 24"-48" (36" for optimal filtration) |
| Freeboard | 50% of bed depth |
| Service flow rate | 6-15 gpm/sq.ft. with intermittant peak flow 20 gpm/ sq.ft. |
| Backwash flow rate | 14-18 gpm/ sq.ft. |
| Backwash bed expansion | 30-40% of bed depth |
| Other | Influent water quality and effluent requirements may affect operating parameters A gravel support bed is required Allow bed to saturate before initial backwash |
| Code | Model | Cu. Ft./Bag | Weight/Cu. Ft. Lbs (Approximate) |
| A8023 | Filter-Ag Plus® | 1 | 50 |
Data Sheet
ANTHRACITE
| Physical properties | #1 Anthracite | #1½ Anthracite | #2 Anthracite |
| Bulk Density | 50 lbs./cu. ft. | ||
| Effective Size | 0.6-0.8 mm | 0.85-0.95 mm | 1.7-2.0 mm |
| Uniformity Coefficient | <1.7 | <1.7 | <1.6 |
| Mesh Size | 14x30 | 10x20 | 4x12 |
| Acid Solubility | <1% | ||
| Caustic Solubility | <1% | ||
| Specific Gravity | 1.6 gm/cc | ||
| Hardness | 3.0-3.8 (Mohs scale) | ||
| Color | Black |
| Conditions for operation | #1 Anthracite | #1½ Anthracite | #2 Anthracite |
| Water pH range | 24-36 in. 10-18 in multibed filters |
||
| Freeboard | 50% of bed depth (min.) | ||
| Service flow rate | 5 gpm/sq. ft. or higher depending upon local conditions | ||
| Backwash flow rate | 12-18 gpm/sq. ft. | 18-25 gpm/sq. ft. | use air scour |
| Backwash bed expansion | 20-40% of bed depth |
|
| Code | Model | Cu. Ft./Bag | Weight/Cu. Ft. Lbs (Approximate) |
Bags/Pallet | Weight/Pallet Lbs |
Pallet Dimensions |
| A8029 | Anthracite #1 (0.6-0.8 mm) | 1 | 50 | 40/151 | 2550 | 40" x 48" x 56" |
| A8030 | Anthracite #1½ (0.85-0.95 mm) | 1 | 50 | 80/303 | 2550 | 40" x 48" x 56" |
| A8031 | Anthracite #2 (1.7-2.0 mm) | 1 | 50 | 120/454 | 2550 | 40" x 48" x 56" |
Data Sheet
TURBIDEX™
Item Part: TURBIDEX
Sediment removal media down to 3-5 micron
Superior turbidity reduction down to 1 NTU
Flow up to 15 gpm/ft 2
NSF Certified
Packed on 50 lb. bag
DATA SHEET
MICRO-Z
Item Part: MICROZ
Sediment removal media: 5-micron nominal rating
NSF Certified
Low pressure loss
Packed on 1 cuft. bag
DATA SHEET
KDF
TURBIDEX
Turbidex is composed of aluminosilicate mineral with high surface area that provides a exceptional filtration of suspended solids. The macroporous nature of this filter medium allows the filter reach a filtration rating of 5 micron particles. The irregular and high porosity surface of Turbidex makes it the perfect filter media for removing suspended solids.
– Produces less water turbidity.
– Reduces the total operating cost.
– Reduces backwash up to 50%.
– Less shipping cost compared to other filter media.
– A single medium replaces several layers of other filter media.
– Turbidex is certified NSF Standard 61
Turbidex Data Sheet
TURBIDEX
Turbidex is composed of aluminosilicate mineral with high surface area that provides a exceptional filtration of suspended solids. The macroporous nature of this filter medium allows the filter reach a filtration rating of 5 micron particles. The irregular and high porosity surface of Turbidex makes it the perfect filter media for removing suspended solids.
– Produces less water turbidity.
– Reduces the total operating cost.
– Reduces backwash up to 50%.
– Less shipping cost compared to other filter media.
– A single medium replaces several layers of other filter media.
– Turbidex is certified NSF Standard 61
FILTER-AG PLUS
| Bulk Density | 50 lbs/cu.ft |
| Effective Size | 0.55mm |
| Uniformity Coefficient | 1.8 |
| Mesh Size | 14 x 30 |
| Specific Gravity | 2.2 g/cc |
| Hardness | 4-5 (Mohs Scale) |
| Color | White to off white |
| Conditions for operation | |
| Water pH range | Wide range |
| Maximum Water Temperature | 140˚F/60˚C (media can be steam cleaned) |
| Bed depth | 24"-48" (36" for optimal filtration) |
| Freeboard | 50% of bed depth |
| Service flow rate | 6-15 gpm/sq.ft. with intermittant peak flow 20 gpm/ sq.ft. |
| Backwash flow rate | 14-18 gpm/ sq.ft. |
| Backwash bed expansion | 30-40% of bed depth |
| Other | Influent water quality and effluent requirements may affect operating parameters A gravel support bed is required Allow bed to saturate before initial backwash |
| Code | Model | Cu. Ft./Bag | Weight/Cu. Ft. Lbs (Approximate) |
| A8023 | Filter-Ag Plus® | 1 | 50 |
Data Sheet
ANTHRACITE
| Physical properties | #1 Anthracite | #1½ Anthracite | #2 Anthracite |
| Bulk Density | 50 lbs./cu. ft. | ||
| Effective Size | 0.6-0.8 mm | 0.85-0.95 mm | 1.7-2.0 mm |
| Uniformity Coefficient | <1.7 | <1.7 | <1.6 |
| Mesh Size | 14x30 | 10x20 | 4x12 |
| Acid Solubility | <1% | ||
| Caustic Solubility | <1% | ||
| Specific Gravity | 1.6 gm/cc | ||
| Hardness | 3.0-3.8 (Mohs scale) | ||
| Color | Black |
| Conditions for operation | #1 Anthracite | #1½ Anthracite | #2 Anthracite |
| Water pH range | 24-36 in. 10-18 in multibed filters |
||
| Freeboard | 50% of bed depth (min.) | ||
| Service flow rate | 5 gpm/sq. ft. or higher depending upon local conditions | ||
| Backwash flow rate | 12-18 gpm/sq. ft. | 18-25 gpm/sq. ft. | use air scour |
| Backwash bed expansion | 20-40% of bed depth |
|
| Code | Model | Cu. Ft./Bag | Weight/Cu. Ft. Lbs (Approximate) |
Bags/Pallet | Weight/Pallet Lbs |
Pallet Dimensions |
| A8029 | Anthracite #1 (0.6-0.8 mm) | 1 | 50 | 40/151 | 2550 | 40" x 48" x 56" |
| A8030 | Anthracite #1½ (0.85-0.95 mm) | 1 | 50 | 80/303 | 2550 | 40" x 48" x 56" |
| A8031 | Anthracite #2 (1.7-2.0 mm) | 1 | 50 | 120/454 | 2550 | 40" x 48" x 56" |
Data Sheet
KDF
Item Part: KDF-55
For chlorine and heavy metal reduction, including lead, mercury, nickel, chromium
Effective in controlling bacteria buildup, algae, fungi, and scale, even in hot water
NSF Certified
Item Part: KDF-85
For iron and hydrogen sulfide
Effective in controlling bacteria buildup, algae, and scale
NSF Certified
DATA SHEET
TURBIDEX™
Item Part: TURBIDEX
Sediment removal media down to 3-5 micron
Superior turbidity reduction down to 1 NTU
Flow up to 15 gpm/ft 2
NSF Certified
Packed on 50 lb. bag
DATA SHEET
MICRO-Z
Item Part: MICROZ
Sediment removal media: 5-micron nominal rating
NSF Certified
Low pressure loss
Packed on 1 cuft. bag
DATA SHEET
RESINS
TURBIDEX
Turbidex is composed of aluminosilicate mineral with high surface area that provides a exceptional filtration of suspended solids. The macroporous nature of this filter medium allows the filter reach a filtration rating of 5 micron particles. The irregular and high porosity surface of Turbidex makes it the perfect filter media for removing suspended solids.
– Produces less water turbidity.
– Reduces the total operating cost.
– Reduces backwash up to 50%.
– Less shipping cost compared to other filter media.
– A single medium replaces several layers of other filter media.
– Turbidex is certified NSF Standard 61
Turbidex Data Sheet
TURBIDEX
Turbidex is composed of aluminosilicate mineral with high surface area that provides a exceptional filtration of suspended solids. The macroporous nature of this filter medium allows the filter reach a filtration rating of 5 micron particles. The irregular and high porosity surface of Turbidex makes it the perfect filter media for removing suspended solids.
– Produces less water turbidity.
– Reduces the total operating cost.
– Reduces backwash up to 50%.
– Less shipping cost compared to other filter media.
– A single medium replaces several layers of other filter media.
– Turbidex is certified NSF Standard 61
FILTER-AG PLUS
| Bulk Density | 50 lbs/cu.ft |
| Effective Size | 0.55mm |
| Uniformity Coefficient | 1.8 |
| Mesh Size | 14 x 30 |
| Specific Gravity | 2.2 g/cc |
| Hardness | 4-5 (Mohs Scale) |
| Color | White to off white |
| Conditions for operation | |
| Water pH range | Wide range |
| Maximum Water Temperature | 140˚F/60˚C (media can be steam cleaned) |
| Bed depth | 24"-48" (36" for optimal filtration) |
| Freeboard | 50% of bed depth |
| Service flow rate | 6-15 gpm/sq.ft. with intermittant peak flow 20 gpm/ sq.ft. |
| Backwash flow rate | 14-18 gpm/ sq.ft. |
| Backwash bed expansion | 30-40% of bed depth |
| Other | Influent water quality and effluent requirements may affect operating parameters A gravel support bed is required Allow bed to saturate before initial backwash |
| Code | Model | Cu. Ft./Bag | Weight/Cu. Ft. Lbs (Approximate) |
| A8023 | Filter-Ag Plus® | 1 | 50 |
Data Sheet
ANTHRACITE
| Physical properties | #1 Anthracite | #1½ Anthracite | #2 Anthracite |
| Bulk Density | 50 lbs./cu. ft. | ||
| Effective Size | 0.6-0.8 mm | 0.85-0.95 mm | 1.7-2.0 mm |
| Uniformity Coefficient | <1.7 | <1.7 | <1.6 |
| Mesh Size | 14x30 | 10x20 | 4x12 |
| Acid Solubility | <1% | ||
| Caustic Solubility | <1% | ||
| Specific Gravity | 1.6 gm/cc | ||
| Hardness | 3.0-3.8 (Mohs scale) | ||
| Color | Black |
| Conditions for operation | #1 Anthracite | #1½ Anthracite | #2 Anthracite |
| Water pH range | 24-36 in. 10-18 in multibed filters |
||
| Freeboard | 50% of bed depth (min.) | ||
| Service flow rate | 5 gpm/sq. ft. or higher depending upon local conditions | ||
| Backwash flow rate | 12-18 gpm/sq. ft. | 18-25 gpm/sq. ft. | use air scour |
| Backwash bed expansion | 20-40% of bed depth |
|
| Code | Model | Cu. Ft./Bag | Weight/Cu. Ft. Lbs (Approximate) |
Bags/Pallet | Weight/Pallet Lbs |
Pallet Dimensions |
| A8029 | Anthracite #1 (0.6-0.8 mm) | 1 | 50 | 40/151 | 2550 | 40" x 48" x 56" |
| A8030 | Anthracite #1½ (0.85-0.95 mm) | 1 | 50 | 80/303 | 2550 | 40" x 48" x 56" |
| A8031 | Anthracite #2 (1.7-2.0 mm) | 1 | 50 | 120/454 | 2550 | 40" x 48" x 56" |
Data Sheet
DEIONIZATION RESINS
Item Part: RESIN-DI-RES
Resintech® MDB-30 resin
Color indicating resin changes color when exhausted
H / OH form
Packed on 25 lt. bag
Item Part: RESIN-DI-THERMAX
Tulsion® MB-101CC resin
DATA SHEET RESIN-DI-THERMAX
DATA SHEET RESIN-DI-RES
ANIONIC RESINS
Item Part: RESIN-AN-A400
Purolite® A-400 resin
For general applications
NSF Certified
Packed on 1cuft. bag
Item Part: RESIN-AN-PFA
Purolite® PFA-300E resin
Specially designed for arsenic, nitrates, sulfate, uranium,
alkalinity removal
NSF Certified
Packed on 1 cuft. bag
Item Part: RESIN-NI
Purolite® A-520E resin
Specially formulated for nitrate removal
NSF Certified
Kosher certified
Packed on 1 cuft. bag
DATA SHEET RESIN-AN-A400
DATA SHEET RESIN-AN-PFA
DATA SHEET RESIN-NI
CATIONIC RESINS
Item Part: RESIN-CA
8% crosslinking
Packed on 25 lt. bag
Item Part: RESIN-CA-PU
Purolite® C-100E resin
NSF Certified
Kosher certified
Packed on 1 cuft. bag
Item Part: RESIN-SSTC60
Purolite® SSTC60 resin
NSF Certified
High regeneration efficiency
Packed on 1 cuft. bag
Item Part: RESIN-CA-RE
Resintech® CG8
NSF Certified
Packed on 1cuft. bag
DATA SHEET RESIN-CA
DATA SHEET RESIN-CA-PU
DATA SHEET RESIN-SSTC60
DATA SHEET RESIN-CA-RE
TURBIDEX™
Item Part: TURBIDEX
Sediment removal media down to 3-5 micron
Superior turbidity reduction down to 1 NTU
Flow up to 15 gpm/ft 2
NSF Certified
Packed on 50 lb. bag
DATA SHEET
MICRO-Z
Item Part: MICROZ
Sediment removal media: 5-micron nominal rating
NSF Certified
Low pressure loss
Packed on 1 cuft. bag
DATA SHEET
GREENSAND
TURBIDEX
Turbidex is composed of aluminosilicate mineral with high surface area that provides a exceptional filtration of suspended solids. The macroporous nature of this filter medium allows the filter reach a filtration rating of 5 micron particles. The irregular and high porosity surface of Turbidex makes it the perfect filter media for removing suspended solids.
– Produces less water turbidity.
– Reduces the total operating cost.
– Reduces backwash up to 50%.
– Less shipping cost compared to other filter media.
– A single medium replaces several layers of other filter media.
– Turbidex is certified NSF Standard 61
Turbidex Data Sheet
TURBIDEX
Turbidex is composed of aluminosilicate mineral with high surface area that provides a exceptional filtration of suspended solids. The macroporous nature of this filter medium allows the filter reach a filtration rating of 5 micron particles. The irregular and high porosity surface of Turbidex makes it the perfect filter media for removing suspended solids.
– Produces less water turbidity.
– Reduces the total operating cost.
– Reduces backwash up to 50%.
– Less shipping cost compared to other filter media.
– A single medium replaces several layers of other filter media.
– Turbidex is certified NSF Standard 61
FILTER-AG PLUS
| Bulk Density | 50 lbs/cu.ft |
| Effective Size | 0.55mm |
| Uniformity Coefficient | 1.8 |
| Mesh Size | 14 x 30 |
| Specific Gravity | 2.2 g/cc |
| Hardness | 4-5 (Mohs Scale) |
| Color | White to off white |
| Conditions for operation | |
| Water pH range | Wide range |
| Maximum Water Temperature | 140˚F/60˚C (media can be steam cleaned) |
| Bed depth | 24"-48" (36" for optimal filtration) |
| Freeboard | 50% of bed depth |
| Service flow rate | 6-15 gpm/sq.ft. with intermittant peak flow 20 gpm/ sq.ft. |
| Backwash flow rate | 14-18 gpm/ sq.ft. |
| Backwash bed expansion | 30-40% of bed depth |
| Other | Influent water quality and effluent requirements may affect operating parameters A gravel support bed is required Allow bed to saturate before initial backwash |
| Code | Model | Cu. Ft./Bag | Weight/Cu. Ft. Lbs (Approximate) |
| A8023 | Filter-Ag Plus® | 1 | 50 |
Data Sheet
ANTHRACITE
| Physical properties | #1 Anthracite | #1½ Anthracite | #2 Anthracite |
| Bulk Density | 50 lbs./cu. ft. | ||
| Effective Size | 0.6-0.8 mm | 0.85-0.95 mm | 1.7-2.0 mm |
| Uniformity Coefficient | <1.7 | <1.7 | <1.6 |
| Mesh Size | 14x30 | 10x20 | 4x12 |
| Acid Solubility | <1% | ||
| Caustic Solubility | <1% | ||
| Specific Gravity | 1.6 gm/cc | ||
| Hardness | 3.0-3.8 (Mohs scale) | ||
| Color | Black |
| Conditions for operation | #1 Anthracite | #1½ Anthracite | #2 Anthracite |
| Water pH range | 24-36 in. 10-18 in multibed filters |
||
| Freeboard | 50% of bed depth (min.) | ||
| Service flow rate | 5 gpm/sq. ft. or higher depending upon local conditions | ||
| Backwash flow rate | 12-18 gpm/sq. ft. | 18-25 gpm/sq. ft. | use air scour |
| Backwash bed expansion | 20-40% of bed depth |
|
| Code | Model | Cu. Ft./Bag | Weight/Cu. Ft. Lbs (Approximate) |
Bags/Pallet | Weight/Pallet Lbs |
Pallet Dimensions |
| A8029 | Anthracite #1 (0.6-0.8 mm) | 1 | 50 | 40/151 | 2550 | 40" x 48" x 56" |
| A8030 | Anthracite #1½ (0.85-0.95 mm) | 1 | 50 | 80/303 | 2550 | 40" x 48" x 56" |
| A8031 | Anthracite #2 (1.7-2.0 mm) | 1 | 50 | 120/454 | 2550 | 40" x 48" x 56" |
Data Sheet
GREENSAND PLUS ™
Item Part: GREENSAND
Removal of soluble iron, manganese, hydrogen sulfide, arsenic and radium
Packed on ½ cuft. bag (44 lbs.)
DATA SHEET
TURBIDEX™
Item Part: TURBIDEX
Sediment removal media down to 3-5 micron
Superior turbidity reduction down to 1 NTU
Flow up to 15 gpm/ft 2
NSF Certified
Packed on 50 lb. bag
DATA SHEET
MICRO-Z
Item Part: MICROZ
Sediment removal media: 5-micron nominal rating
NSF Certified
Low pressure loss
Packed on 1 cuft. bag
DATA SHEET